Archives

  • -

Privacy Social-Media

IP Verpackungen GmbH

Industriestraße 16 – D 52457 Aldenhoven
Tel.: +49 2464 – 99 130-0
Fax: +49 2464 – 99 130-99
www.IP-Verpackungen.de
info@ip-verpackungen.de

Vertretungsberechtigte Geschäftsführer:
Dipl.-Kfm. Frank Féron,

Amtsgericht Düren, HRB 4023
UST-IdNr. DE 812 819 363

 

Data Protection Officer:
DDK Datenschutz-Direkt GmbH
Carlstraße 50
52531 Übach-Palenberg
Phone: +49 245 9069253
E-mail: info@datenschutz-direkt.de

 

Our social media appearances

This privacy policy applies to the following social media presence

  • https://www.instagram.com/ip.verpackungen/
  • https://www.xing.com/pages/ip-verpackungen-gmbh
  • https://www.linkedin.com/company/ip-verpackungen-gmbh/

Data processing through social networks

We maintain publicly available profiles in social networks. The individual social networks we use can be found below.

Social networks such as Facebook, X etc. can generally analyze your user behavior comprehensively if you visit their website or a website with integrated social media content (e.g., like buttons or banner ads). When you visit our social media pages, numerous data protection-relevant processing operations are triggered. In detail:

If you are logged in to your social media account and visit our social media page, the operator of the social media portal can assign this visit to your user account. Under certain circumstances, your personal data may also be recorded if you are not logged in or do not have an account with the respective social media portal. In this case, this data is collected, for example, via cookies stored on your device or by recording your IP address.

Using the data collected in this way, the operators of the social media portals can create user profiles in which their preferences and interests are stored. This way you can see interest-based advertising inside and outside of your social media presence. If you have an account with the social network, interest-based advertising can be displayed on any device you are logged in to or have logged in to.

Please also note that we cannot retrace all processing operations on the social media portals. Depending on the provider, additional processing operations may therefore be carried out by the operators of the social media portals. Details can be found in the terms of use and privacy policy of the respective social media portals.

Legal basis

Our social media appearances should ensure the widest possible presence on the Internet. This is a legitimate interest within the meaning of Art. 6 (1) lit. f GDPR. The analysis processes initiated by the social networks may be based on divergent legal bases to be specified by the operators of the social networks (e.g., consent within the meaning of Art. 6 (1) (a) GDPR).

Responsibility and assertion of rights

If you visit one of our social media sites (e.g., Facebook), we, together with the operator of the social media platform, are responsible for the data processing operations triggered during this visit. You can in principle protect your rights (information, correction, deletion, limitation of processing, data portability and complaint) vis-à-vis us as well as vis-à-vis the operator of the respective social media portal (e.g., Facebook).

Please note that despite the shared responsibility with the social media portal operators, we do not have full influence on the data processing operations of the social media portals. Our options are determined by the company policy of the respective provider.

Storage time

The data collected directly from us via the social media presence will be deleted from our systems as soon as you ask us to delete it, you revoke your consent to the storage or the purpose for the data storage lapses. Stored cookies remain on your device until you delete them. Mandatory statutory provisions – in particular, retention periods – remain unaffected.

We have no control over the storage duration of your data that are stored by the social network operators for their own purposes. For details, please contact the social network operators directly (e.g., in their privacy policy, see below).

Your rights

You have the right to receive information about the origin, recipient and purpose of your stored personal data at any time and free of charge. You also have the right to object, the right to data portability and the right to file a complaint with the responsible regulatory agency. Furthermore, you can request the correction, blocking, deletion and, under certain circumstances, the restriction of the processing of your personal data.

Individual social networks

Instagram

We have a profile on Instagram. The provider of this service is Meta Platforms Ireland Limited, Merrion Road, Dublin 4, D04 X2K5, Irland.

Data transmission to the US is based on the Standard Contractual Clauses (SCC) of the European Commission. Details can be found here: https://www.facebook.com/legal/EU_data_transfer_addendumhttps://privacycenter.instagram.com/policy/ and https://de-de.facebook.com/help/566994660333381.

For details on how they handle your personal information, see the Instagram Privacy Policy: https://privacycenter.instagram.com/policy/.

The company is certified in accordance with the “EU-US Data Privacy Framework” (DPF). The DPF is an agreement between the European Union and the US, which is intended to ensure compliance with European data protection standards for data processing in the US. Every company certified under the DPF is obliged to comply with these data protection standards. For more information, please contact the provider under the following link: https://www.dataprivacyframework.gov/s/participant-search/participant-detail?contact=true&id=a2zt0000000GnywAAC&status=Active

XING

We have a profile on XING. The provider is New Work SE, Dammtorstraße 30, 20354 Hamburg, Germany. Details on their handling of your personal data can be found in the XING Privacy Policy: https://privacy.xing.com/de/datenschutzerklaerung.

LinkedIn

We have a LinkedIn profile. The provider is the LinkedIn Ireland Unlimited Company, Wilton Plaza, Wilton Place, Dublin 2, Ireland. LinkedIn uses advertising cookies.

If you want to disable LinkedIn advertising cookies, please use the following link: https://www.linkedin.com/psettings/guest-controls/retargeting-opt-out.

Data transmission to the US is based on the Standard Contractual Clauses (SCC) of the European Commission. Details can be found here: https://www.linkedin.com/legal/l/dpa and https://www.linkedin.com/legal/l/eu-sccs.

For details on how they handle your personal information, please refer to LinkedIn’s privacy policy: https://www.linkedin.com/legal/privacy-policy.


  • -

laminated, 2-comp, large

Tags : 

Article no. 1635

EAN code 4019336016353

Colour champagne

Material XPS

Dimensions (l × w × h) 220×285×75 mm

Subpackaging 4×50

Carton / qty 200

Cartons / pallet 12


  • -

CONSERVE RESOURCES – FOR THE GOOD OF THE ENVIRONMENT

Perfect packaging for takeaway food, from hamburgers and hot dogs to full gourmet meals. Our expanded polystyrene (XPS) insulating foam material keeps food hot, and has a cut-resistant coating that allows a meal to be eaten directly from the box with a knife and fork. When it comes to sauces and dips, we recommend our dimensionally stable laminated finish, designed to prevent liquids soaking into the material. Businesses with an environment-friendly …

Show more

  • -

  • -

  • -

  • -

  • -

  • -

  • -

  • -

Excellent work

Vielfältige international anerkannte Zertifikate über die branchenüblichen hinaus zeigen unsere Verantwortung gegnüber Mitarbeitern, Umwelt und Kunden.

zertifiziertes Qualitätsmanagement nach DIN EN ISO 9001
HACCP-Zertifikat nach den Standards von WHO und UN zur Gefahrenvermeidung in Bezug auf Lebensmittel
TÜV-geprüftes Energie-Management nach DIN EN ISO 50001
BG-geprüfter Arbeitsschutz mit dem Gütesiegel “Sicher mit System”
Certificat of compliance zu Recy-EPS

 

03_einstieg

  • -

Corporation

https://ip-verpackungen.de/wp-content/uploads/2017/03/Inde_Plastik-TobiasVollmer1468_bearbeitet.jpg
https://ip-verpackungen.de/wp-content/uploads/2017/03/Inde_Plastik-TobiasVollmer1384_bearbeitet.jpg
https://ip-verpackungen.de/wp-content/uploads/2017/03/Inde_Plastik-TobiasVollmer1261_bearbeitet.jpg

Competence to go

We stand for top quality at innovative packaging solutions in the food sector. As leading providers of take-away packaging items worldwide we set a high value on environmental friendly production processes designed to conserve resources.

IP Verpackungen began in 1978 with plastic pots, blister packs and cosmetic packaging, made near the German town of Düren on the river Inden, from which our name derives. The closeness of a lignite-mining operation meant that the firm had to move to Aldenhoven, conveniently located on the A44 autobahn. Our plant has meanwhile grown into a 54,000m² facility employing 170 workers, and we have become a strong and reliable partner to the specialist wholesale sector.

Our good customer relationships deliver frequent benefits. Many product ideas arise from tailored solutions created by our in-house tooling experts on the basis of special customer requirements, often typical for their specific countries. This is what enables us to work together with our partners on the further development of our product range. Quality-conscious, consumer-friendly and economical.

  • Almost 40 years’ experience
  • Production based in Germany
  • Delivery times as short as 24 hours
  • The latest technology
  • In-house product development
  • Worldwide sales
  • Reliable, partnership-based customer relations
  • Continuous further development
  • Exacting quality control
  • Extensive certification



CONSERVE RESOURCES – FOR THE GOOD OF THE ENVIRONMENT

Perfect packaging for takeaway food, from hamburgers and hot dogs to full gourmet meals. Our expanded polystyrene (XPS) insulating foam material keeps food hot, and has a cut-resistant coating that allows a meal to be eaten directly from the box with a knife and fork. When it comes to sauces and dips, we recommend our dimensionally stable laminated finish, designed to prevent liquids soaking into the material. Businesses with an environment-friendly approach can rely on our recycled packaging items made exclusively from plastic recovered from our own in-house production processes.

Our machine-tool and moulding experts develop solutions for particular – often country-specific – customer needs in a quality-conscious, consumer-friendly and cost-effective way.

Conserving resources in the interests of our environment
Our packaging items for the takeaway food sector are practical, lightweight, hygienic and cost-saving – but they nevertheless have an impact on the environment, as do all packaging products that use crude oil as a raw material and which eventually need to be disposed of. We are conscious of our responsibility as a manufacturer of plastic products. We therefore use the very latest technology as part of our efforts to conserve both energy and raw materials. It is for this reason that we have also developed an entire range of products based on recycled material. These articles made of recycled XPS are manufactured using a certified production process that reuses all the waste from our stamping and punching machines.

And now there is even more good news to report, as the five-strong team of our R&D department engages with the task of developing a line of products made of biodegradable materials.

The result of all this effort is that we need only limited amounts of plastic to make our XPS packaging products. Just a tiny ball of material is all it takes, for example, to make a whole hamburger box. The conversion of the plastic into foam means that the resulting packaging product is 90% air. This increases its insulating performance, while reducing its weight.


Facts

Our particular set of skills lies in the development and manufacture of packaging materials made of expanded polystyrene foam (XPS) for the fast-food sector. This is in addition to our original sealing-machine systems and wide range of accessories, plus products made of polypropylene (PP) and polyethylene (PET).

We deliver throughout Europe, sometimes in less than 24 hours. Our products are distributed exclusively, both in Germany and elsewhere, via our network of qualified wholesale suppliers.

Are you a wholesaler and have further questions? We will be pleased to provide further guidance.

  • 170 employees, including five trainees
  • 54,000 m² of works premises, of which
  • 34,000 m² are occupied by buildings
  • 2,000 m² of floorspace dedicated to sales, R&D, design and tool/mould making
  • 11,000 m² occupied by extrusion and production (deep drawing)
  • 21,000 m² of storage and despatch facilities, with 12 truck-loading ramps

We currently hold three sets of certification:

  • DIN EN ISO 9001:2015
  • DIN EN ISO 50001:2011
  • Food Safety System Certification 22000
  • KlimaInvest Green Concepts Green electricity certificate

 

 


  • -

Food boxes

Food boxes

Trouble-free transport and serving for any meal. Our practical, requirement-oriented boxes offer just the right takeaway packaging for anything from a simple hamburger to a gourmet ready-meal. XPS is vital when it comes to hot meals, as it keeps them warm and prevents any leaking of sauces or dips. Laminated products offer additional protection in this respect, Moisture drips straight off the smooth surface in a similar way to the lotus effect. This means that soups or sauces keep somewhat longer when stored in the food box. The robust, shape-conserving lamination of our food box helps it to withstand high temperatures. The material’s layered structure also makes it cut-resistant, allowing a meal to be eaten directly from the food box with normal cutlery. Our Recy-XPS boxes are particularly environment-friendly, as they are made exclusively from recycled plastic generated by our own in-house production processes.

 

 

 

 

 

 

Laminiert

laminated

siegelbar

sealable

mit Deckel verfügbar

available with lid

mikrowellenfest

microwave-compatible

Black-Line-Produkte

Black Line products

PS

Polystyrene; a hard, crystal-clear plastic

 

 

XPS

Extruded polystyrene for moulded foam-plastic parts. White, highly insulating and extremely light, thanks to the high proportion of air that it contains

PP

Polypropylene; a compact, highly temperature-resistant material

APET

Amorphous PET; a supple, transparent, easy-to-recycle plastic


  • -

Bowls

02_Teller-Schalen

Bowls

From starter to dessert and from soup to salad, our bowls meet all your needs. Whether laminated and with a matching domed lid; in black, white or champagne; oval or round; with or without compartments – you will find that we have just the right bowl. Tough, robust and good to look at.

Laminiert

laminated

siegelbar

sealable

mit Deckel verfügbar

available with lid

mikrowellenfest

microwave-compatible

Black-Line-Produkte

Black Line products

PS

Polystyrene; a hard, crystal-clear plastic

 

 

XPS

Extruded polystyrene for moulded foam-plastic parts. White, highly insulating and extremely light, thanks to the high proportion of air that it contains

PP

Polypropylene; a compact, highly temperature-resistant material

APET

Amorphous PET; a supple, transparent, easy-to-recycle plastic


  • -

Soup bowls

03_suppenbecher-schalen

Soup cups and bowls

Perfectly served, whether hot or cold. Efficient XPS insulation keeps food nice and warm, while at the same time ensuring that you are safe from burns even when handling bowls of hot soup. The stable laminated surface prevents moisturing of the material, and the transparent tops make cups and bowls portable whether they contain soup, stew, Chinese noodles or frozen yoghurt.

 

 

 

 

 

 

 

 

 

 

Laminiert

laminated

siegelbar

sealable

mit Deckel verfügbar

available with lid

mikrowellenfest

microwave-compatible

Black-Line-Produkte

Black Line products

PS

Polystyrene; a hard, crystal-clear plastic

 

 

XPS

Extruded polystyrene for moulded foam-plastic parts. White, highly insulating and extremely light, thanks to the high proportion of air that it contains

PP

Polypropylene; a compact, highly temperature-resistant material

APET

Amorphous PET; a supple, transparent, easy-to-recycle plastic


  • -

Catering

04_catering

Catering

Presented with style: Our catering trays ensure appetising presentation for finger food and party snacks. This elegant, lightweight alternative to conventional serving plates is nevertheless highly robust and designed for efficient stacking, thereby permitting the trouble-free transport of even large quantities.

Laminiert

laminated

siegelbar

sealable

mit Deckel verfügbar

available with lid

mikrowellenfest

microwave-compatible

Black-Line-Produkte

Black Line products

PS

Polystyrene; a hard, crystal-clear plastic

 

 

XPS

Extruded polystyrene for moulded foam-plastic parts. White, highly insulating and extremely light, thanks to the high proportion of air that it contains

PP

Polypropylene; a compact, highly temperature-resistant material

APET

Amorphous PET; a supple, transparent, easy-to-recycle plastic


  • -

Salad boxes

05_salatboxen-schalen

Salad boxes and bowls

Freshly and crisply presented. Our crystal-clear salad boxes offer an enticing all-round view of tasty salads. Some come with integrated bowl-shaped indentations or compartments for dressings and sauces. The range includes a wide selection of shapes and sizes, with capacities of up to one litre.

Laminiert

laminated

siegelbar

sealable

mit Deckel verfügbar

available with lid

mikrowellenfest

microwave-compatible

Black-Line-Produkte

Black Line products

PS

Polystyrene; a hard, crystal-clear plastic

 

 

XPS

Extruded polystyrene for moulded foam-plastic parts. White, highly insulating and extremely light, thanks to the high proportion of air that it contains

PP

Polypropylene; a compact, highly temperature-resistant material

APET

Amorphous PET; a supple, transparent, easy-to-recycle plastic


  • -

Sushi

06_Sushi

Sushi

This Japanese delicacy has long been a popular snack treat. Our sushi tray allows you to present the container’s contents in an appetising way. The clear transparent lid offers both a hygienic seal and safe transport. Itadakimasu!

Laminiert

laminated

siegelbar

sealable

mit Deckel verfügbar

available with lid

mikrowellenfest

microwave-compatible

Black-Line-Produkte

Black Line products

PS

Polystyrene; a hard, crystal-clear plastic

 

 

XPS

Extruded polystyrene for moulded foam-plastic parts. White, highly insulating and extremely light, thanks to the high proportion of air that it contains

PP

Polypropylene; a compact, highly temperature-resistant material

APET

Amorphous PET; a supple, transparent, easy-to-recycle plastic


  • -

Microwave trays

07_mikrowellenschalen

MICROWAVE TRAYS

Our practically designed, microwave-compatible trays allow you to heat up ready meals quickly, while conserving their vitamins. Just loosen the cover to allow steam to escape, and place the bowl in the microwave.

The tightly fitting cover ensures leak-free transport, and its special shape also allows for the easy stacking of boxes.

Laminiert

laminated

siegelbar

sealable

mit Deckel verfügbar

available with lid

mikrowellenfest

microwave-compatible

Black-Line-Produkte

Black Line products

PS

Polystyrene; a hard, crystal-clear plastic

 

 

XPS

Extruded polystyrene for moulded foam-plastic parts. White, highly insulating and extremely light, thanks to the high proportion of air that it contains

PP

Polypropylene; a compact, highly temperature-resistant material

APET

Amorphous PET; a supple, transparent, easy-to-recycle plastic


  • -

XPS Sealing trays

08_siegelschale

XPS Sealing trays

Cooking is now a cult, as more and more people are discovering how fulfilling it can be to make elaborate meals for their friends and family. The act of cooking has become a shared event. But day-to-day needs mean that it sometimes also has to be quick and convenient. This accurately explains the rich and ever-growing selection of available takeaway meals. Food is packed in portion-sized containers with a foil seal designed to keep the flavour in and prevent leaks. Just remove the foil, and enjoy your meal!

 

 

 

 

 

 

 

 

 

Laminiert

laminated

siegelbar

sealable

mit Deckel verfügbar

available with lid

mikrowellenfest

microwave-compatible

Black-Line-Produkte

Black Line products

PS

Polystyrene; a hard, crystal-clear plastic

 

 

XPS

Extruded polystyrene for moulded foam-plastic parts. White, highly insulating and extremely light, thanks to the high proportion of air that it contains

PP

Polypropylene; a compact, highly temperature-resistant material

APET

Amorphous PET; a supple, transparent, easy-to-recycle plastic


  • -

Sealing systems

09_siegelsysteme

Sealing systems

Our sealing devices let you quickly and easily place a flavour-tight, leak-proof cover on any freshly prepared ready meal from salad to soup, allowing you to keep hot foods nice and warm until they are served. The fast and easy operation and space-saving size of these sealing devices helps to make them a reliable part of your daily routine. We supply a wide selection of sealable bowls, portion-sized plates and trays. Bon appétit!


  • -

  • -

Contact

Are you a wholesaler and have further questions? We will be pleased to provide further guidance.

IP Verpackungen GmbH
Industriestraße 16
D-52457 Aldenhoven

 

Or contact us directly:




    Information on the processing of your personal data in the context of the contact form can be found in the privacy policy.


    • -

    Imprint

    IP Verpackungen GmbH

    Industriestraße 16 – D 52457 Aldenhoven
    Tel.: +49 2464 – 99 130-0
    Fax: +49 2464 – 99 130-99
    www.IP-Verpackungen.de
    info@ip-verpackungen.de

    Vertretungsberechtigte Geschäftsführer:
    Dipl.-Kfm. Frank Féron,

    Amtsgericht Düren, HRB 4023
    UST-IdNr. DE 812 819 363

     

    Data Protection Officer:
    DDK Datenschutz-Direkt GmbH
    Carlstraße 50
    52531 Übach-Palenberg
    Phone: +49 245 9069253
    E-mail: info@datenschutz-direkt.de


    • -

    Privacy

    Privacy Policy

    1. An overview of data protection

    General information

    The following information will provide you with an easy to navigate overview of what will happen with your personal data when you visit this website. The term “personal data” comprises all data that can be used to personally identify you. For detailed information about the subject matter of data protection, please consult our Data Protection Declaration, which we have included beneath this copy.

    Data recording on this website

    Who is the responsible party for the recording of data on this website (i.e., the “controller”)?

    The data on this website is processed by the operator of the website, whose contact information is available under section “Information about the responsible party (referred to as the “controller” in the GDPR)” in this Privacy Policy.

    How do we record your data?

    We collect your data as a result of your sharing of your data with us. This may, for instance be information you enter into our contact form.

    Other data shall be recorded by our IT systems automatically or after you consent to its recording during your website visit. This data comprises primarily technical information (e.g., web browser, operating system, or time the site was accessed). This information is recorded automatically when you access this website.

    What are the purposes we use your data for?

    A portion of the information is generated to guarantee the error free provision of the website. Other data may be used to analyze your user patterns.

    What rights do you have as far as your information is concerned?

    You have the right to receive information about the source, recipients, and purposes of your archived personal data at any time without having to pay a fee for such disclosures. You also have the right to demand that your data are rectified or eradicated. If you have consented to data processing, you have the option to revoke this consent at any time, which shall affect all future data processing. Moreover, you have the right to demand that the processing of your data be restricted under certain circumstances. Furthermore, you have the right to log a complaint with the competent supervising agency.

    Please do not hesitate to contact us at any time if you have questions about this or any other data protection related issues.

    1. Hosting

    We are hosting the content of our website at the following provider:

    Host Europe

    The provider is the Host Europe GmbH, Hansestraße 111, 51149 Köln, Germany (hereinafter referred to as: Host Europe). Whenever you visit our website, Host Europe will record a variety of logfiles, including your IP addresses.

    For details, please refer to the Data Privacy Policy of Host Europe: https://www.hosteurope.de/AGB/Datenschutzerklaerung/.

    We use Host Europe on the basis of Art. 6(1)(f) GDPR. We have a legitimate interest in making the depiction of our website as dependable as possible. If you have been asked for your respective consent, processing shall occur exclusively on the basis of Art. 6(1)(a) GDPR and § 25(1) TDDDG, if the consent comprises the archiving of cookies or access to information on the user’s device (e.g., device finger printing) as defined in the TDDDG. Such consent may be revoked at any time.

    Data processing

    We have concluded a data processing agreement (DPA) for the use of the above-mentioned service. This is a contract mandated by data privacy laws that guarantees that they process personal data of our website visitors only based on our instructions and in compliance with the GDPR.

    1. General information and mandatory information

    Data protection

    The operators of this website and its pages take the protection of your personal data very seriously. Hence, we handle your personal data as confidential information and in compliance with the statutory data protection regulations and this Data Protection Declaration.

    Whenever you use this website, a variety of personal information will be collected. Personal data comprises data that can be used to personally identify you. This Data Protection Declaration explains which data we collect as well as the purposes we use this data for. It also explains how, and for which purpose the information is collected.

    We herewith advise you that the transmission of data via the Internet (i.e., through e-mail communications) may be prone to security gaps. It is not possible to completely protect data against third-party access.

    Information about the responsible party (referred to as the “controller” in the GDPR)

    The data processing controller on this website is:

    IP Verpackungen GmbH
    Industriestraße 16
    52457 Aldenhoven

    Phone: +49 2464 – 99 130-0
    E-mail: info@ip-verpackungen.de

    The controller is the natural person or legal entity that single-handedly or jointly with others makes decisions as to the purposes of and resources for the processing of personal data (e.g., names, e-mail addresses, etc.).

    Storage duration

    Unless a more specific storage period has been specified in this privacy policy, your personal data will remain with us until the purpose for which it was collected no longer applies. If you assert a justified request for deletion or revoke your consent to data processing, your data will be deleted, unless we have other legally permissible reasons for storing your personal data (e.g., tax or commercial law retention periods); in the latter case, the deletion will take place after these reasons cease to apply.

    General information on the legal basis for the data processing on this website

    If you have consented to data processing, we process your personal data on the basis of Art. 6(1)(a) GDPR or Art. 9 (2)(a) GDPR, if special categories of data are processed according to Art. 9 (1) DSGVO. In the case of explicit consent to the transfer of personal data to third countries, the data processing is also based on Art. 49 (1)(a) GDPR. If you have consented to the storage of cookies or to the access to information in your end device (e.g., via device fingerprinting), the data processing is additionally based on § 25 (1) TDDDG. The consent can be revoked at any time. If your data is required for the fulfillment of a contract or for the implementation of pre-contractual measures, we process your data on the basis of Art. 6(1)(b) GDPR. Furthermore, if your data is required for the fulfillment of a legal obligation, we process it on the basis of Art. 6(1)(c) GDPR. Furthermore, the data processing may be carried out on the basis of our legitimate interest according to Art. 6(1)(f) GDPR. Information on the relevant legal basis in each individual case is provided in the following paragraphs of this privacy policy.

    Designation of a data protection officer

    We have appointed a data protection officer.

    DDK Datenschutz-Direkt GmbH
    Carlstraße 50
    52531 Übach-Palenberg

    Phone: +49 245 9069253
    E-mail: info@datenschutz-direkt.de

    Recipients of personal data

    In the scope of our business activities, we cooperate with various external parties. In some cases, this also requires the transfer of personal data to these external parties. We only disclose personal data to external parties if this is required as part of the fulfillment of a contract, if we are legally obligated to do so (e.g., disclosure of data to tax authorities), if we have a legitimate interest in the disclosure pursuant to Art. 6 (1)(f) GDPR, or if another legal basis permits the disclosure of this data. When using processors, we only disclose personal data of our customers on the basis of a valid contract on data processing. In the case of joint processing, a joint processing agreement is concluded.

    Revocation of your consent to the processing of data

    A wide range of data processing transactions are possible only subject to your express consent. You can also revoke at any time any consent you have already given us. This shall be without prejudice to the lawfulness of any data collection that occurred prior to your revocation.

    Right to object to the collection of data in special cases; right to object to direct advertising (Art. 21 GDPR)

    IN THE EVENT THAT DATA ARE PROCESSED ON THE BASIS OF ART. 6(1)(E) OR (F) GDPR, YOU HAVE THE RIGHT TO AT ANY TIME OBJECT TO THE PROCESSING OF YOUR PERSONAL DATA BASED ON GROUNDS ARISING FROM YOUR UNIQUE SITUATION. THIS ALSO APPLIES TO ANY PROFILING BASED ON THESE PROVISIONS. TO DETERMINE THE LEGAL BASIS, ON WHICH ANY PROCESSING OF DATA IS BASED, PLEASE CONSULT THIS DATA PROTECTION DECLARATION. IF YOU LOG AN OBJECTION, WE WILL NO LONGER PROCESS YOUR AFFECTED PERSONAL DATA, UNLESS WE ARE IN A POSITION TO PRESENT COMPELLING PROTECTION WORTHY GROUNDS FOR THE PROCESSING OF YOUR DATA, THAT OUTWEIGH YOUR INTERESTS, RIGHTS AND FREEDOMS OR IF THE PURPOSE OF THE PROCESSING IS THE CLAIMING, EXERCISING OR DEFENCE OF LEGAL ENTITLEMENTS (OBJECTION PURSUANT TO ART. 21(1) GDPR).

    IF YOUR PERSONAL DATA IS BEING PROCESSED IN ORDER TO ENGAGE IN DIRECT ADVERTISING, YOU HAVE THE RIGHT TO OBJECT TO THE PROCESSING OF YOUR AFFECTED PERSONAL DATA FOR THE PURPOSES OF SUCH ADVERTISING AT ANY TIME. THIS ALSO APPLIES TO PROFILING TO THE EXTENT THAT IT IS AFFILIATED WITH SUCH DIRECT ADVERTISING. IF YOU OBJECT, YOUR PERSONAL DATA WILL SUBSEQUENTLY NO LONGER BE USED FOR DIRECT ADVERTISING PURPOSES (OBJECTION PURSUANT TO ART. 21(2) GDPR).

    Right to log a complaint with the competent supervisory agency

    In the event of violations of the GDPR, data subjects are entitled to log a complaint with a supervisory agency, in particular in the member state where they usually maintain their domicile, place of work or at the place where the alleged violation occurred. The right to log a complaint is in effect regardless of any other administrative or court proceedings available as legal recourses.

    Right to data portability

    You have the right to have data that we process automatically on the basis of your consent or in fulfillment of a contract handed over to you or to a third party in a common, machine-readable format. If you should demand the direct transfer of the data to another controller, this will be done only if it is technically feasible.

    Information about, rectification and eradication of data

    Within the scope of the applicable statutory provisions, you have the right to demand information about your archived personal data, their source and recipients as well as the purpose of the processing of your data at any time. You may also have a right to have your data rectified or eradicated. If you have questions about this subject matter or any other questions about personal data, please do not hesitate to contact us at any time.

    Right to demand processing restrictions

    You have the right to demand the imposition of restrictions as far as the processing of your personal data is concerned. To do so, you may contact us at any time. The right to demand restriction of processing applies in the following cases:

    • In the event that you should dispute the correctness of your data archived by us, we will usually need some time to verify this claim. During the time that this investigation is ongoing, you have the right to demand that we restrict the processing of your personal data.
    • If the processing of your personal data was/is conducted in an unlawful manner, you have the option to demand the restriction of the processing of your data instead of demanding the eradication of this data.
    • If we do not need your personal data any longer and you need it to exercise, defend or claim legal entitlements, you have the right to demand the restriction of the processing of your personal data instead of its eradication.
    • If you have raised an objection pursuant to Art. 21(1) GDPR, your rights and our rights will have to be weighed against each other. As long as it has not been determined whose interests prevail, you have the right to demand a restriction of the processing of your personal data.

    If you have restricted the processing of your personal data, these data – with the exception of their archiving – may be processed only subject to your consent or to claim, exercise or defend legal entitlements or to protect the rights of other natural persons or legal entities or for important public interest reasons cited by the European Union or a member state of the EU.

    SSL and/or TLS encryption

    For security reasons and to protect the transmission of confidential content, such as purchase orders or inquiries you submit to us as the website operator, this website uses either an SSL or a TLS encryption program. You can recognize an encrypted connection by checking whether the address line of the browser switches from “http://” to “https://” and also by the appearance of the lock icon in the browser line.

    If the SSL or TLS encryption is activated, data you transmit to us cannot be read by third parties.

    Rejection of unsolicited e-mails

    We herewith object to the use of contact information published in conjunction with the mandatory information to be provided in our Site Notice to send us promotional and information material that we have not expressly requested. The operators of this website and its pages reserve the express right to take legal action in the event of the unsolicited sending of promotional information, for instance via SPAM messages.

    1. Recording of data on this website

    Server log files

    The provider of this website and its pages automatically collects and stores information in so-called server log files, which your browser communicates to us automatically. The information comprises:

    • The type and version of browser used
    • The used operating system
    • Referrer URL
    • The hostname of the accessing computer
    • The time of the server inquiry
    • The IP address

    This data is not merged with other data sources.

    This data is recorded on the basis of Art. 6(1)(f) GDPR. The operator of the website has a legitimate interest in the technically error free depiction and the optimization of the operator’s website. In order to achieve this, server log files must be recorded.

    Contact form

    If you submit inquiries to us via our contact form, the information provided in the contact form as well as any contact information provided therein will be stored by us in order to handle your inquiry and in the event that we have further questions. We will not share this information without your consent.

    The processing of these data is based on Art. 6(1)(b) GDPR, if your request is related to the execution of a contract or if it is necessary to carry out pre-contractual measures. In all other cases the processing is based on our legitimate interest in the effective processing of the requests addressed to us (Art. 6(1)(f) GDPR) or on your agreement (Art. 6(1)(a) GDPR) if this has been requested; the consent can be revoked at any time.

    The information you have entered into the contact form shall remain with us until you ask us to eradicate the data, revoke your consent to the archiving of data or if the purpose for which the information is being archived no longer exists (e.g., after we have concluded our response to your inquiry). This shall be without prejudice to any mandatory legal provisions, in particular retention periods.

    Request by e-mail, telephone, or fax

    If you contact us by e-mail, telephone or fax, your request, including all resulting personal data (name, request) will be stored and processed by us for the purpose of processing your request. We do not pass these data on without your consent.

    These data are processed on the basis of Art. 6(1)(b) GDPR if your inquiry is related to the fulfillment of a contract or is required for the performance of pre-contractual measures. In all other cases, the data are processed on the basis of our legitimate interest in the effective handling of inquiries submitted to us (Art. 6(1)(f) GDPR) or on the basis of your consent (Art. 6(1)(a) GDPR) if it has been obtained; the consent can be revoked at any time.

    The data sent by you to us via contact requests remain with us until you request us to delete, revoke your consent to the storage or the purpose for the data storage lapses (e.g. after completion of your request). Mandatory statutory provisions – in particular statutory retention periods – remain unaffected.

    1. Custom Services

    Handling applicant data

    We offer website visitors the opportunity to submit job applications to us (e.g., via e-mail, via postal services on by submitting the online job application form). Below, we will brief you on the scope, purpose and use of the personal data collected from you in conjunction with the application process. We assure you that the collection, processing, and use of your data will occur in compliance with the applicable data privacy rights and all other statutory provisions and that your data will always be treated as strictly confidential.

    Scope and purpose of the collection of data

    If you submit a job application to us, we will process any affiliated personal data (e.g., contact and communications data, application documents, notes taken during job interviews, etc.), if they are required to make a decision concerning the establishment or an employment relationship. The legal grounds for the aforementioned are § 26 BDSG according to German Law (Negotiation of an Employment Relationship), Art. 6(1)(b) GDPR (General Contract Negotiations) and – provided you have given us your consent – Art. 6(1)(a) GDPR. You may revoke any consent given at any time. Within our company, your personal data will only be shared with individuals who are involved in the processing of your job application.

    If your job application should result in your recruitment, the data you have submitted will be archived on the grounds of § 26 BDSG and Art. 6(1)(b) GDPR for the purpose of implementing the employment relationship in our data processing system.

    Data Archiving Period

    If we are unable to make you a job offer or you reject a job offer or withdraw your application, we reserve the right to retain the data you have submitted on the basis of our legitimate interests (Art. 6(1)(f) GDPR) for up to 6 months from the end of the application procedure (rejection or withdrawal of the application). Afterwards the data will be deleted, and the physical application documents will be destroyed. The storage serves in particular as evidence in the event of a legal dispute. If it is evident that the data will be required after the expiry of the 6-month period (e.g., due to an impending or pending legal dispute), deletion will only take place when the purpose for further storage no longer applies.

    Longer storage may also take place if you have given your agreement (Article 6(1)(a) GDPR) or if statutory data retention requirements preclude the deletion.


    • -

    General Terms

    General Terms and Conditions

     

     

    I. Application

     

    1. Orders only become binding upon the order confirmation of the supplier. Modifications and amendments must be in writing. All offers are subject to change unless they are binding offers.
    2. In case of regular business relationship these terms – even if they are not expressly referred to – will also be valid for future dealings provided that they have been communicated to the customer on the occasion of a former order confirmed by the supplier.
    3. Terms of the customer shall not be valid unless they have been explicitly accepted in writing by the supplier.
    4. In case individual provisions may or will be invalid the remaining provisions are not affected.

     

    II. Prices

     

    1. Our prices are ex works excluding freight, customs duty, accessory import duties plus VAT.
    2. In case the decisive cost factors change considerably from the moment the offer has been submitted or confirmed until the delivery, supplier and customer will agree on an adjustment of prices and share of expenses.
    3. In case of new orders (= follow-up orders) the supplier shall not be bound to former prices.

     

    III. Obligation to deliver/accept the goods

     

    1. Terms of delivery shall commence upon the receipt of all documents necessary for the execution of the order, upon the advance payment and upon the timely material provision as far as the latter has been agreed upon. The term of delivery shall be deemed to have been observed if notification of readiness for shipment has been given even if the shipment is delayed or impossible without supplier’s fault.
    2. In case agreed delivery terms shall not be met due to supplier’s fault, unless it is a result of intent or gross negligence, the customer shall be entitled to claim a compensation for delay or to withdraw from the contract after the expiry of a reasonable period of grace without being entitled to assert claims of any kind on that account. The compensation for delay shall be limited to at least 5 % of that part of the shipment which has not been fulfilled according to the contract. A rescission shall be excluded in case the customer is in default of acceptance. The customer shall be entitled to prove a higher damage.
    3. Reasonable partial deliveries and a reasonable deviation from the volume ordered of up to plus/minus 10% shall be permissible.
    4. In the case of call-off orders without agreed contract period, lot size and acceptance dates, the supplier shall be entitled to claim a binding stipulation of these terms at the latest three months after confirmation of the order. If the customer fails to comply with this request within three weeks, the supplier shall be entitled to set a period of grace of two weeks and to withdraw from the contract and/or to claim damages after this period of grace has elapsed.
    5. Should the customer not fulfill his obligation to take delivery, the supplier is, without prejudice to any other rights, not bound to the regulations regarding the public auction of chattels. In this case the supplier may sell the delivery item on the open market according to prior notice to the customer.
    6. Events beyond the supplier’s control shall entitle the supplier to postpone delivery for the duration of the hindrance and a reasonable time for adaptation, or, because of the part of the contract not yet fulfilled, to withdraw partially or completely from the contract. Strike, lockout or unforeseeable and unavoidable circumstances i.e. breakdown, which render prompt delivery impossible despite reasonable efforts, shall be treated as force majeure for which the supplier shall be obliged to provide proof.
      This shall also apply if the above-mentioned hindrances occur during delay or at a subcontractor. The customer may request that the supplier declares within two weeks whether he will withdraw or deliver within a reasonable period of grace. Should he not declare this, the supplier may withdraw from the part of the contract not yet fulfilled. The supplier will immediately inform the customer of an event of force majeure as described above. He is obliged to restrict the customer’s damages as far as possible.

     

    IV. Packaging, shipment, transfer of risk, default of acceptance

     

    1. Unless otherwise agreed, packaging, mode of shipment and dispatch route shall be at supplier’s discretion.
    2. All risks shall devolve upon the customer at the latest when the shipment leaves the supplier works, even where carriage paid delivery was agreed upon. If the customer is responsible for delays in dispatch the risk is already transferred to him upon the dispatch advice.
    3. On customer’s request, the delivery items are insured at his expense against risks to be specified by him.

     

    V. Retention of Title

     

    1. The supplier shall retain title in the deliveries until all receivables have been paid by the customer even if the purchase price for particular marked claims has been paid. In case of account current the retention of title in the deliveries (reserved goods) shall be considered as collateral for the supplier’s claim on balance. If in connection with the payment of the purchase price a liability of the supplier is established, the retention of title shall not expire before the honouring of the bill of exchange by the buyer as the drawee.
    2. According to § 950 BGB (German Civil Code) the acquisition of property shall be excluded in the case of handling or processing by the customer on behalf of the supplier; the supplier is entitled to the co-ownership of the new objects in the ratio of the net invoice value of his goods to the net invoice value of the goods to be treated or processed. The new product shall be deemed as reserved goods to secure the supplier’s claims according to paragraph 1.
    3. In the case of processing (assembly/mixing) with other products not belonging to the supplier, the provisions of §§ 947, 948 BGB (German Civil Code) shall apply. As a result, the supplier’s co-ownership share in the new product shall be regarded as reserved goods as defined by these provisions.
    4. The customer may only resell the reserved goods in the course of normal business and only provided that he has agreed a retention of title with his customers according to paragraphs 1 to 3. The customer shall not be entitled to dispose of the reserved goods in any other way, especially pledging or security assignment.
    5. In the case of resale the customer hereby transfers to the supplier all claims and additional rights with respect to third parties arising out of the resale until complete fulfillment of all supplier’s claims. On supplier’s request the customer shall be obliged to provide information to the supplier immediately and to provide all the documents necessary for the enforceability of the supplier’s rights vis-à-vis third parties.
    6. Should the reserved goods after processing according to paragraphs 2 and/or 3 be resold by the customer together with other goods not belonging to the supplier, the assignment of the purchase price claim according to paragraph 5 is only valid to the sum of the invoice value of the supplier’s reserved goods.
    7. Should the value of the supplier’s existing securities exceed the total secured claims by more than 10%, the supplier shall be obliged, on customer’s request, to release securities of his choice.
    8. The customer must inform the supplier immediately of any distraint or attachment of the reserved goods by third parties. All costs arising through intervention of this kind shall be borne by the customer unless they are borne by third parties.
    9. If, according to the afore mentioned provisions, the supplier makes use of his retention of title by taking back the reserved goods, he shall be entitled to sell the goods on the open market or to sell the goods by public sale. The assertion of the retention of title and especially the assertion of the claim for surrender shall constitute a rescission of the contract. The withdrawal of the reserved goods shall be effected to the value of the proceeds generated, however not exceeding the agreed delivery prices. Further claims for damages, especially for loss of profit, shall remain unaffected.
    10. The customer stores the reserved goods for the supplier free of charge. He is obliged to insure them at his own expense against usual risks as fire, theft and water. The customer hereby assigns his claims for compensation to the supplier arising from damages as described above against insurance companies or other parties liable for damages. The supplier hereby accepts the assignment.

     

    Vl. Liability for defects

     

    1. The initial samples submitted for examination by the supplier at customer’s request are decisive for the quality and the design of the goods. References to technical standards serve as specification and may not be interpreted as guarantee of quality.
    2. In case the supplier has advised the customer beyond the contractual commitments, he shall only be liable for the functioning and the suitability of the delivery item after express prior warranty.
    3. Complaints have to be reported without delay and in writing. In case of hidden defects, the complaint has to reported immediately on discovery. Unless otherwise agreed, all warranty claims in both cases become time-barred 12 months after transfer of perils. If and to the extent to which the German Civil Code prescribes compulsory longer periods according to § 438, para. 1 no. 2, § 47, para. 1 and § 634 a para. 1 no. 2 German Civil Code, those shall apply. In the case of foils delivered by us, deviations in the thickness of + 10%, in the width of + 2% and in the specific weight of + 8% are customary and do not represent reasons for complaints on the part of the customer. The same applies to colour deviations. In any case, the customer shall bear all risks of processing.
    4. The initial samples released in writing by the supplier specify the quality and design to be expected. In the event of a justified defect notification, the supplier shall be obliged to make amendments. Should he not fulfill this obligation within an adequate period or if an amendment fails despite repeated efforts, the customer shall be entitled to reduce the purchase price or to withdraw from the contract. Further claims, especially claims for compensation for consequential damage caused by defect shall only be admissible within the scope of the regulations according to paragraph VII. If requested, replaced goods are to be resent to the supplier free of charge.
    5. Arbitrary rework and inappropriate treatment result in the loss of all warranty claims. In order to avoid damages out of scale or in the case of delayed removal of defects by the supplier, the customer shall be entitled, upon prior notification, to rework and to claim for the appropriate cost.
    6. Wear and abrasion during use according to the agreement do not entail warranty claims.
    7. Claims for recourse according to §§ 478, 479 German Civil Code shall only be valid if their assertion by the customer was justified and only pursuant to the statutory provisions. They shall however not be valid in the case of ex gratia arrangements not agreed upon with the supplier. Moreover, claims for recourse imply the fulfilment of obligations of the regress beneficiary, in particular his compliance with defect reporting requirements.

     

    Vll. General liability limitations

     

    In all cases in which the supplier is – due to contractual or legal regulations – obliged to compensate for damages or to reimburse expenses notwithstanding the a. m. conditions, he shall only be liable in the case of culpable willful intent, gross negligence, human injury or damage to human health on the part of the supplier, his executives or assistants. The mandatory liability according to the Product Liability Act as well as the liability for a performance bond will remain unaffected. The liability for culpable breach of essential contractual obligations will also remain unaffected; insofar, the liability shall be restricted to the foreseeable losses typical of this type of contract, however except those cases set forth in sentence one of this paragraph. The afore-mentioned regulations do not imply a reversal of the burden of proof to the detriment of the customer.

     

    Vlll. Terms of payment

     

    1. All payments shall exclusively be settled in € (Euro) to the supplier.
    2. Unless otherwise agreed the purchase price for deliveries or other services is payable less 2% discount for payment within 14 days from date of invoice and for payment within 30 days from date of invoice net. The allowance of a discount is subject to the settlement of all former undisputed invoices due for payment. In case of payment by bills of exchange no discount
      will be granted.
    3. In case the agreed date of payment will be exceeded, default interest of 8% above the ECB base rate will be charged unless the supplier establishes a higher claim. The customer will be entitled to prove a minor damage.
    4. The supplier reserves the right to refuse checks and bills of exchange. Checks and rediscountable bills of exchange will only be accepted on account of performance. All costs involved are charged to the customer.
    5. The customer may only offset claims or exercise his right of retention in case his claims are undisputed or legally recognized.
    6. The persistent non-compliance of payment terms or circumstances that justify reasonable doubts as to the customer’s soundness (credit worthiness) entail the immediate maturity of the supplier’s claims. In this case the supplier is moreover entitled to request advance payments for outstanding deliveries as well as to resign from the contract after the unsuccessful expiration of a reasonable deadline.
    7. Agents are not entitled to act as a debt collector.

     

    IX. Moulds (tools)

     

    1. The price for moulds includes the cost for a single sampling. However, it does not include the cost for testing or processing devices or for modifications initiated by the customer. Cost for further samplings for which the supplier is responsible are at his expense.
    2. Unless otherwise agreed the supplier is and remains the owner of the moulds produced for the customer by the supplier himself or by a third party assigned by the supplier.
    3. If, according to the agreement, the customer shall become the owner of the forms, the property shall be transferred to the customer after the complete payment of the purchase price. The delivery of the moulds shall be replaced by the custody in favour of the customer. Irrespective of the legal claim for return and the service life of the forms, the supplier shall be the sole owner until the termination of the contract.
    4. In the case of moulds owned by the customer according to paragraph 3 and/or in the case of moulds provided by the supplier on loan the liability of the supplier regarding storage and care shall be restricted to the diligence applied to personal matters. Maintenance and insurance cost shall be borne by the customer. The supplier’s obligations are met in case the customer on completion of the order and after a respective demand note fails to collect the moulds within an adequate period of time. As long as the customer has not fulfilled his contractual obligations to the full extent, the supplier may in any case exercise his right of retention regarding the moulds.

     

    X. Material provision

     

    1. If material is delivered by the customer it has to be delivered at his expense and risk in due time and flawlessly with an appropriate quantity premium of 5%.
    2. In case these conditions will not be fulfilled, the delivery period will be extended reasonably. Except in cases of force majeure, the customer has to bear additional costs even in the case of process interruptions.

     

    XI. Industrial property rights and defects of title

     

    1. To the extent that the supplier has to execute the delivery according to drawings, models or samples or using parts provided by the customer, the customer shall ensure that any industrial property rights of third parties in the country of destination of the goods will not be violated. The supplier will advise the customer of industrial property rights known to him. The customer shall indemnify the supplier from third party claims and make up for damages occurred. In case a third party bars the supplier from the production or the delivery under reference to its property right, the supplier – without checking the legal situation – shall be entitled to suspend the deliverables up to the clarification of the legal situation by the customer or the third party. If the continuation of the contract should become untenable to the supplier due to the delay, the supplier is entitled to rescind the contract.
    2. Any drawings and samples given to the supplier but not leading to an order will be returned on request; if no such request is made, said supplier is entitled to destroy them three months after submission of the tender. The same obligation shall apply to the customer accordingly. The party entitled to disposal by destruction must inform the other party of the intention prior to doing so and in good time.
    3. The supplier shall hold copyrights and if applicable industrial property rights, especially all utilization and exploitation rights in the models, forms and devices, designs and drawings created by him of a third party on his behalf.
    4. In the case of other defects of title no. VI shall apply accordingly.

     

    XII. Place of performance and place of venue

     

    1. Place of performance and place of venue shall be Aldenhoven.
    2. German law shall exclusively apply. The application of the United Nations Convention on Contracts for the National Sale of Goods (BGBl. 1898 S. 536) for the Federal Republic of Germany shall be excluded.

     

    XIII. Final Clause

     
    This is not a certified translation of our General Terms and Conditions. In case of doubt or problems of interpretation the German version of these regulations is binding.


    • -

    • -

    Laminated Products

    Produkte laminiert

    Laminated Products

    Keep hot things really hot: In our laminated out-of-home packaging a meal is insulated at the best.


    • -

    Sealable products

    Siegelprodukte

    Sealable Products

    With a simply perfect closure to keep the flavour in and prevent anything getting out.


    • -

    Black Line

    Black Line

    Black Line

    Our Black Line adds an elegant new touch to packaging design by subtly upgrading the setting of the food product concerned.


    • -

    Recy-Products

    RECY-Produkte

    RECY-Products

    Environment-friendly. Our Recy products are made of recycled materials generated by our own in-house production.


    • -

    Recy-PET-Products

    RECY-PET-Produkte

    RECY-PET-Products

    Crystal-clear and environment-friendly; resource-conserving, hygienic and made out of recycled PET.


    • -

    Partners

    Partner

     

     

     

     

     

     


    • -

    Certifications

    OUTSTANDING WORK

     

    Numerous internationally recognised certificates far beyond the usual industry standards confirm our commitment to employees, environment and customers alike.

     

     

    • FSSC 22000, the certification scheme for food safety management systems recognized by the Global Food Safety Initiative (GFSI)

     

     

     

     

     


    • -

    • -

    Combi packaging sushi-tray & lid No. 14 “antifog”

    Tags : 

    Article no. 410

    EAN code 4019336004107

    Colour black / transparent

    Material PET

    Dimensions (l x w x h) tray 170×90×20 mm

    Dimensions (l x w x h) lid 177×98×30 mm

    Subpackaging 6×100 + 6×100

    Carton / qty 600

    Cartons / pallet 20


    • -

    • -

    Combi packaging sushi-tray & lid No. 15 “antifog”

    Tags : 

    Article no. 411

    EAN code 4019336004114

    Colour black / transparent

    Material PET

    Dimensions (l x w x h) tray 165×113×20 mm

    Dimensions (l x w x h) lid 170×123×30 mm

    Subpackaging 5×100 + 5×100

    Carton / qty 500

    Cartons / pallet 20


    • -

    • -

    Combi packaging sushi-tray & lid No. 16 “antifog”

    Tags : 

    Article no. 412

    EAN code 4019336004121

    Colour black / transparent

    Material PET

    Dimensions (l x w x h) tray 185×127×20 mm

    Dimensions (l x w x h) lid 193×137×38 mm

    Subpackaging 4×100 + 4×100

    Carton / qty 400

    Cartons / pallet 20


    • -

    • -

    Combi packaging sushi-tray & lid No. 17 “antifog”

    Tags : 

    Article no. 413

    EAN code 4019336004138

    Colour black / transparent

    Material PET

    Dimensions (l x w x h) tray 215×130×18 mm

    Dimensions (l x w x h) lid 220×142×32 mm

    Subpackaging 2×100 + 2×100

    Carton / qty 200

    Cartons / pallet 32


    • -

    • -

    Combi packaging sushi-tray & lid No. 18 “antifog”

    Tags : 

    Article no. 414

    EAN code 4019336004145

    Colour black / transparent

    Material PET

    Dimensions (l x w x h) tray 255×185×20 mm

    Dimensions (l x w x h) lid 260×190×30 mm

    Subpackaging 2×100 + 2×100

    Carton / qty 200

    Cartons / pallet 21


    • -

    • -

    • -

    • -

    • -

    • -

    • -

    Salad box R8 PP 1000 ml

    Tags : 

    Article no. 214

    EAN code 4019336002141

    Colour transparent

    Material PP

    Dimensions (heigth) 84

    Diameter ø 168 mm

    Subpackaging 4×50

    Carton / qty 200

    Cartons / pallet 24


    • -

    Salad box R8 PP 750 ml

    Tags : 

    Article no. 213

    EAN code 4019336002134

    Colour transparent

    Material PP

    Dimensions (heigth) 69

    Diameter ø 168 mm

    Subpackaging 4×50

    Carton / qty 200

    Cartons / pallet 24


    • -

    Salad box R8 PP 500 ml

    Tags : 

    Article no. 212

    EAN code 4019336002127

    Colour transparent

    Material PP

    Dimensions (heigth) 68

    Diameter ø 142 mm

    Subpackaging 10×50

    Carton / qty 500

    Cartons / pallet 16


    • -

    Salad box R8 PP 375 ml

    Tags : 

    Article no. 211

    EAN code 4019336002110

    Colour transparent

    Material PP

    Dimensions (heigth) 51

    Diameter ø 142 mm

    Subpackaging 10×50

    Carton / qty 500

    Cartons / pallet 16


    • -

    Salad box R8 PP 250 ml

    Tags : 

    Article no. 210

    EAN code 4019336002103

    Colour transparent

    Material PP

    Dimensions (heigth) 38

    Diameter ø 142 mm

    Subpackaging 10×50

    Carton / qty 500

    Cartons / pallet 16


    • -

    Cup 30 ml and lid

    Tags : 

    Article no. 1894

    EAN code 4019336018944

    Colour Bowl and lid transparent

    Material PP

    Dimensions (heigth) 30 mm

    Diameter ø 46 mm

    Subpackaging 40×50

    Carton / qty 2000

    Cartons / palle 42


    • -

    Dome lid Isoform bowl B2, for plate 1796 and 2296

    Tags : 

    Article no. 1794

    EAN code 4019336017947

    Colour transparent

    Material PET

    Dimensions (heigth)) 40 mm

    Diameter ø 175 mm

    Subpackaging 6×100

    Carton / qty 600

    Cartons / pallet 20


    • -

    Isoform bowl B2 laminated

    Tags : 

    Article no. 2296

    EAN code 4019336022965

    Colour black

    Material XPS

    Diameter ø 170 mm

    Subpackaging 6×100

    Carton / qty 600

    Cartons / pallet 20


    • -

    Isoform bowl B2 laminated

    Tags : 

    Article no. 1796

    EAN code 4019336017961

    Colour white

    Material XPS

    Diameter ø 170 mm

    Subpackaging 6×100

    Carton / qty 600

    Cartons / pallet 20


    • -

    Isoform bowl B3, laminated

    Tags : 

    Article no. 2246

    EAN code 4019336022460

    Colour black

    Material XPS

    Diameter ø 225 mm

    Subpackaging 6×100

    Carton / qty 600

    Cartons / pallet 15


    • -

    Isoform bowl B3, laminated

    Tags : 

    Article no. 1746

    EAN code 4019336017466

    Colour white

    Material XPS

    Diameter ø 225 mm

    Subpackaging 6×100

    Carton / qty 600

    Cartons / pallet 15


    • -

    Dome lid Isoform bowl B3, for plate 1746 and 2246

    Tags : 

    Article no. 1747

    EAN code 4019336017473

    Colour transparent

    Material PET

    Dimensions (heigth) 40 mm

    Diameter ø 225 mm

    Subpackaging 6×100

    Carton / qty 600

    Cartons / pallet 15


    • -

    2 in 1 (UFO bowl), salad bowl black 750 ccm, lid transparent

    Tags : 

    Article no. 245

    EAN code 4019336002455

    Colour black/transparent

    Material PET

    Dimensions (heigth) 80 mm

    Diameter ø 250+237 mm

    Subpackaging (2×50) + (2×50)

    Carton / qty 100

    Cartons / pallet 25


    • -

    Mini UFO salad bowl 600 ccm

    Tags : 

    Article no. 246

    EAN code 4019336002462

    Colour black

    Material PET

    Dimensions (heigth) 47 mm

    Diameter ø 180 mm

    Subpackaging 6×50

    Carton / qty 300

    Cartons / pallet 20


    • -

    Lid mini UFO salad bowl 600 ccm, fits bowl “246”

    Tags : 

    Article no. 247

    EAN code 4019336002479

    Colour transparent

    Material PET

    Dimensions (heigth) 35 mm

    Diameter ø 185 mm

    Subpackaging 6×50

    Carton / qty 300

    Cartons / pallet 20


    • -

    Salad bowl + lid 600 ccm

    Tags : 

    Article no. 229

    EAN code 4019336002295

    Colour transparent

    Material PET

    Dimensions (heigth) 20 mm

    Diameter ø 160 mm

    Subpackaging (5×50) + (5×50)

    Carton / qty 500

    Cartons / pallet 32


    • -

    Salad bowl 600 ccm

    Tags : 

    Article no. 238

    EAN code 4019336002387

    Colour schwarz

    Material PET

    Dimensions (heigth) 55 mm

    Diameter ø 160 mm

    Subpackaging 10×50

    Carton / qty 500

    Cartons / pallet 32


    • -

    Dome lid Salad bowl 600 ccm, fits bowl “226”

    Tags : 

    Article no. 228

    EAN code 4019336002288

    Colour transparent

    Material PET

    Dimensions (heigth) 20 mm

    Diameter ø 165 mm

    Subpackaging 10×50

    Carton / qty 500

    Cartons / pallet 32


    • -

    Salad bowl 600 ccm

    Tags : 

    Article no. 226

    EAN code 4019336002264

    Colour transparent

    Material PET

    Dimensions (heigth) 55 mm

    Diameter ø 160 mm

    Subpackaging 10×50

    Carton / qty 500

    Cartons / pallet 32


    • -

    Catering tray 350 mm, laminated

    Tags : 

    Article no. 1246

    EAN code 4019336012461

    Colour white

    Material XPS

    Dimensions (l x w x h) 350×250×30 mm

    Subpackaging 9×10

    Carton / qty 90

    Cartons / pallet 24


    • -

    Catering tray 450 mm, laminated

    Tags : 

    Article no. 1247

    EAN code 4019336012478

    Colour white

    Material XPS

    Dimensions (l x w x h) 450×305×30 mm

    Subpackaging 9×10

    Carton / qty 90

    Cartons / pallet 20


    • -

    Catering tray 550 mm, laminated

    Tags : 

    Article no. 1248

    EAN code 4019336012485

    Colour white

    Material XPS

    Dimensions (l x w x h) 550×355×30 mm

    Subpackaging 5×10

    Carton / qty 90

    Cartons / pallet 50


    • -

    Lid salad bowl 1000 ccm

    Tags : 

    Article no. 224

    EAN code 4019336002240

    Colour transparent

    Material PET

    Dimensions (heigth) 15 mm

    Diameter ø 190 mm

    Subpackaging 6×50

    Carton / qty 300

    Cartons / pallet 32


    • -

    Salad bowl 1000 ccm

    Tags : 

    Article no. 223

    EAN code 4019336002233

    Colour transparent

    Material PET

    Dimensions (heigth) 75 mm

    Diameter ø 180 mm

    Subpackaging 6×50

    Carton / qty 300

    Cartons / pallet 20


    • -

    Lid Catering tray size M

    Tags : 

    Article no. 1171

    EAN code 4019336011716

    Colour transparent

    Material PET

    Dimensions (l x w x h) 360×260×63 mm

    Subpackaging 5×10

    Carton / qty 50

    Cartons / pallet 40


    • -

    Lid Catering tray size L

    Tags : 

    Article no. 1172

    EAN code 4019336011723

    Colour transparent

    Material PET

    Dimensions (l x w x h) 465×315×63 mm

    Subpackaging 5×10

    Carton / qty 50

    Cartons / pallet 16


    • -

    Lid Catering tray size XL

    Tags : 

    Article no. 1173

    EAN code 4019336011730

    Colour transparent

    Material PET

    Dimensions (l x w x h) 550×375×63 mm

    Subpackaging 5×10

    Carton / qty 50

    Cartons / pallet 12


    • -

    Salad bowl 1000 ccm

    Tags : 

    Article no. 239

    EAN code 4019336002394

    Colour black

    Material PET

    Dimensions (heigth) 75 mm

    Diameter ø 180 mm

    Subpackaging 6×50

    Carton / qty 300

    Cartons / pallet 20


    • -

    Catering tray size M

    Tags : 

    Article no. 1165

    EAN code 4019336011655

    Colour black

    Material PET

    Dimensions (l x w x h) 350×250×20 mm

    Subpackaging 10×10

    Carton / qty 100

    Cartons / pallet 40


    • -

    Catering tray size L

    Tags : 

    Article no. 1166

    EAN code 4019336011662

    Colour black

    Material PET

    Dimensions (l x w x h) 450×300×25 mm

    Subpackaging 10×10

    Carton / qty 100

    Cartons / pallet 16


    • -

    Catering tray size XL

    Tags : 

    Article no. 1167

    EAN code 4019336011679

    Colour black

    Material PET

    Dimensions (l x w x h) 550×360×30 mm

    Subpackaging 10×10

    Carton / qty 100

    Cartons / pallet 12


    • -

    Round 1000 ml

    Tags : 

    Article no. 180

    EAN code 4019336001809

    Colour transparent

    Material PET

    Dimensions (heigth) 100 mm

    Diameter ø 188 mm

    Subpackaging 8×50

    Carton / qty 400

    Cartons / pallet 15


    • -

    Laminated 500 ml

    Tags : 

    Article no. 1780

    EAN code 4019336017800

    Colour white

    Material XPS

    Dimensions (l x w x h) 200×171×40 mm

    Subpackaging 6×100

    Carton / qty 600

    Cartons / pallet 12


    • -

    Round 750 ml

    Tags : 

    Article no. 179

    EAN code 4019336001793

    Colour transparent

    Material PET

    Dimensions (heigth) 88 mm

    Diameter ø 174 mm

    Subpackaging 6×50

    Carton / qty 300

    Cartons / pallet 20


    • -

    Laminated, size F, 800 ml

    Tags : 

    Article no. 1783

    EAN code 4019336017831

    Colour white

    Material XPS

    Dimensions (l x w x h) 195×195×45 mm

    Subpackaging 6×100

    Carton / qty 600

    Cartons / pallet 12


    • -

    Laminated, size F, 1000 ml

    Tags : 

    Article no. 1781

    EAN code 4019336017817

    Colour white

    Material XPS

    Dimensions (l x w x h) 195×195×55 mm

    Subpackaging 6×100

    Carton / qty 600

    Cartons / pallet 12


    • -

    Lid soup cup/ PS12/24FCL, non-laminated

    Tags : 

    Article no. 12/24FCL

    EAN code 4019336012249

    Colour transparent

    Material PS

    Dimensions (height) 7 mm

    Diameter ø 118 mm

    Subpackaging 10×50

    Carton / qty 500

    Cartons / pallet 64


    • -

    Soup cup EPS 20FC, 570 ml, non-laminated

    Tags : 

    Article no. 20FC

    EAN code 4019336000208

    Colour white

    Material EPS

    Dimensions (height) 93 mm

    Diameter ø 115 mm

    Subpackaging 20×25

    Carton / qty 500

    Cartons / pallet 16


    • -

    Round 600 ml

    Tags : 

    Article no. 178

    EAN code 4019336001786

    Colour transparent

    Material PET

    Dimensions (heigth) 82 mm

    Diameter ø 174 mm

    Subpackaging 8×50

    Carton / qty 400

    Cartons / pallet 15


    • -

    Soup cup EPS 16FC, 460 ml, non-laminated

    Tags : 

    Article no. 16FC

    EAN code 4019336000161

    Colour white

    Material EPS

    Dimensions (height) 74 mm

    Diameter ø 115 mm

    Subpackaging 20×25

    Carton / qty 500

    Cartons / pallet 16


    • -

    Soup cup EPS 12FC, 340 ml, non-laminated

    Tags : 

    Article no. 12FC

    EAN code 4019336000123

    Colour white

    Material EPS

    Dimensions (height) 56 mm

    Diameter ø 115 mm

    Subpackaging 20×25

    Carton / qty 500

    Cartons / pallet 16


    • -

    Round 500 ml

    Tags : 

    Article no. 177

    EAN code 4019336001779

    Colour transparent

    Material PET

    Dimensions (heigth) 77 mm

    Diameter ø 155 mm

    Subpackaging 10×50

    Carton / qty 500

    Cartons / pallet 15


    • -

    Round 375 ml

    Tags : 

    Article no. 176

    EAN code 4019336001762

    Colour transparent

    Material PET

    Dimensions (heigth) 65 mm

    Diameter ø 155 mm

    Subpackaging 8×50

    Carton / qty 400

    Cartons / pallet 20


    • -

    Round 250 ml

    Tags : 

    Article no. 175

    EAN code 4019336001755

    Colour transparent

    Material PET

    Dimensions (heigth) 65 mm

    Diameter ø 121 mm

    Subpackaging 12×50

    Carton / qty 600

    Cartons / pallet 20


    • -

    Round 150 ml

    Tags : 

    Article no. 174

    EAN code 4019336001748

    Colour transparent

    Material PET

    Dimensions (heigth) 40 mm

    Diameter ø 121 mm

    Subpackaging 14×50

    Carton / qty 700

    Cartons / pallet 20


    • -

    Oval 2000 ml

    Tags : 

    Article no. 166

    EAN code 4019336001663

    Colour transparent

    Material PET

    Dimensions (l x w x h) 198×225×83 mm

    Subpackaging 6×50

    Carton / qty 300

    Cartons / pallet 15


    • -

    Oval 1500 ml

    Tags : 

    Article no. 165

    EAN code 4019336001656

    Colour transparent

    Material PET

    Dimensions (l x w x h) 182×208×76 mm

    Subpackaging 6×50

    Carton / qty 300

    Cartons / pallet 15


    • -

    Lid soup cup

    Tags : 

    Article no. 1771

    EAN code 4019336017718

    Colour white

    Material XPS

    Dimensions (height) 15 mm

    Diameter ø 135 mm

    Subpackaging 12×50

    Carton / qty 600

    Cartons / pallet 15


    • -

    Oval 1000 ml

    Tags : 

    Article no. 164

    EAN code 4019336001649

    Colour transparent

    Material PET

    Dimensions (l x w x h) 158×184×66 mm

    Subpackaging 8×50

    Carton / qty 400

    Cartons / pallet 15


    • -

    Lid soup cup with hole

    Tags : 

    Article no. 1775

    EAN code 4019336017756

    Colour transparent

    Material XPS

    Dimensions (height) 15 mm

    Diameter ø 135 mm

    Subpackaging 12×50

    Carton / qty 600

    Cartons / pallet 15


    • -

    Soup cup IP16, 460 ml, laminated

    Tags : 

    Article no. 1770

    EAN code 4019336017701

    Colour white

    Material XPS

    Dimensions (height) 85 mm

    Diameter ø 130 mm

    Subpackaging 12×50

    Carton / qty 600

    Cartons / pallet 15


    • -

    Oval 750 ml

    Tags : 

    Article no. 163

    EAN code 4019336001632

    Colour transparent

    Material PET

    Dimensions (l x w x h) 144×172×62 mm

    Subpackaging 10×50

    Carton / qty 500

    Cartons / pallet 15


    • -

    Soup cup IP12, 340 ml, laminated

    Tags : 

    Article no. 1772

    EAN code 4019336017725

    Colour white

    Material XPS

    Dimensions (height) 65 mm

    Diameter ø 130 mm

    Subpackaging 12×50

    Carton / qty 600

    Cartons / pallet 15


    • -

    Oval 500 ml

    Tags : 

    Article no. 162

    EAN code 4019336001625

    Colour transparent

    Material PET

    Dimensions (l x w x h) 124×150×55 mm

    Subpackaging 10×50

    Carton / qty 500

    Cartons / pallet 20


    • -

    Oval 375 ml

    Tags : 

    Article no. 161

    EAN code 4019336001618

    Colour transparent

    Material PET

    Dimensions (l x w x h) 115×144×50 mm

    Subpackaging 18×50

    Carton / qty 900

    Cartons / pallet 15


    • -

    Oval 250 ml

    Tags : 

    Article no. 160

    EAN code 4019336001601

    Colour transparent

    Material PET

    Dimensions (l x w x h) 105×133×43 mm

    Subpackaging 12×50

    Carton / qty 600

    Cartons / pallet 20


    • -

    Salad box XS

    Tags : 

    Article no. 150

    EAN code 4019336001502

    Colour transparent

    Material PET

    Dimensions (l x w x h) 140×140×75 mm

    Subpackaging 4×125

    Carton / qty 500

    Cartons / pallet 12


    • -

    Salad box small

    Tags : 

    Article no. 149

    EAN code 4019336001496

    Colour transparent

    Material PET

    Dimensions (l x w x h) 135×220×85 mm

    Subpackaging 4×100

    Carton / qty 400

    Cartons / pallet 12


    • -

    Salad box flat

    Tags : 

    Article no. 148

    EAN code 4019336001489

    Colour transparent

    Material PET

    Dimensions (l x w x h) 195×220×65 mm

    Subpackaging 2×100

    Carton / qty 200

    Cartons / pallet 15


    • -

    Salad box without dressing comp

    Tags : 

    Article no. 147

    EAN code 4019336001472

    Colour transparent

    Material PET

    Dimensions (l x w x h) 195×220×85 mm

    Subpackaging 2×100

    Carton / qty 200

    Cartons / pallet 15


    • -

    Salad box with dressing comp

    Tags : 

    Article no. 146

    EAN code 4019336001465

    Colour transparent

    Material PET

    Dimensions (l x w x h) 195×220×85 mm

    Subpackaging 2×100

    Carton / qty 200

    Cartons / pallet 15


    • -

    Salad box with dressing comp and flat lid

    Tags : 

    Article no. 141

    EAN code 4019336001410

    Colour transparent

    Material PET

    Dimensions (l x w x h) 195×220×55 mm

    Subpackaging 2×100

    Carton / qty 200

    Cartons / pallet 15


    • -

    Stirrer

    Tags : 

    Article no. 1960

    EAN code 4019336019606

    Material PS

    Dimensions (length) 112 mm

    Subpackaging 10×2000

    Carton / qty 20000

    Cartons / pallet 36


    • -

    Chip fork

    Tags : 

    Article no. 1955

    EAN code 4019336019552

    Material PS

    Dimensions (length) 87 mm

    Subpackaging 15×1000

    Carton / qty 15000

    Cartons / pallet 30


    • -

    Coffee spoon standard

    Tags : 

    Article no. 1948

    EAN code 4019336019484

    Material PS

    Dimensions (length) 125 mm

    Subpackaging 20×1000

    Carton / qty 2000

    Cartons / pallet 140


    • -

    Spoon

    Tags : 

    Article no. 1942

    EAN code 4019336019422

    Material PS

    Dimensions (length) 165 mm

    Subpackaging 20×1000

    Carton / qty 2000

    Cartons / pallet 60


    • -

    Fork

    Tags : 

    Article no. 1937

    EAN code 4019336019378

    Material PS

    Dimensions (length) 165 mm

    Subpackaging 20×1000

    Carton / qty 2000

    Cartons / pallet 60


    • -

    Knife

    Tags : 

    Article no. 1932

    EAN code 4019336019323

    Material PS

    Dimensions (length) 165 mm

    Subpackaging 20×1000

    Carton / qty 2000

    Cartons / pallet 60


    • -

    Potato box

    Tags : 

    Article no. 1619

    EAN code 4019336016193

    Material XPS

    Colour gold

    Dimensions (l x w x h) 160×125×85 mm

    Subpackaging 4×125

    Carton / qty 500

    Cartons / pallet 16


    • -

    non-laminated, 1-comp

    Tags : 

    Article no. 1791

    EAN code 4019336017916

    Colour white

    Material XPS

    Diameter ø 260 mm

    Subpackaging 6×100

    Carton / qty 600

    Cartons / pallet 10


    • -

    non-laminated, 2-comp

    Tags : 

    Article no. 1792

    EAN code 4019336017923

    Colour white

    Material XPS

    Diameter ø 260 mm

    Subpackaging 6×100

    Carton / qty 600

    Cartons / pallet 10


    • -

    non-laminated, 3-comp

    Tags : 

    Article no. 1793

    EAN code 4019336017930

    Colour white

    Material XPS

    Diameter ø 260 mm

    Subpackaging 6×100

    Carton / qty 600

    Cartons / pallet 10